Kingspan GreenGuard® XPS Insulation Board is offered in various thickness and available in 25 psi and 40 psi, as well as 60 psi for high load-bearing applications. Rigid XPS insulation board can be used as general purpose insulation for roofing, wall and foundation applications requiring a minimum compressive strength.
GreenGuard Type IV 25 psi Insulation Board is an ideal exterior insulation, meeting your needs for multiple applications. Its extruded polystyrene (XPS) construction provides superior moisture resistance. And since it does not absorb moisture, it retains its insulating properties over time. With an R-Value of 5.0 per inch of thickness, the board increases the energy efficiency of your structures. Plus it’s lightweight, easy to handle, and easy to cut with a knife. Use this insulation for below slab, cavity wall, and foundation applications. It meets and exceeds all Type IV and Type X specifications.
GreenGuard extruded polystyrene (XPS) does not absorb moisture and retains its insulating properties over time, making it an ideal exterior insulation. With an R-Value of 5.0 per inch of thickness, the board increases the energy efficiency of your structures. Plus, it’s light weight, easy to handle, and easy to cut with a knife. GreenGuard Type VI 40 psi Insulation Board is designed for use in high load applications requiring compressive strength up to 40 psi. It meets ASTM C 578 Type VI requirements.
Kingspan GreenGuard Type VII XPS Insulation Board comprises closed–cell extruded polystyrene (XPS) with a minimum compressive strength of 60 psi. It has high water resistance and R–value of 5.0 per inch of thickness. It is available in a square edge board or a drainage channel board.
Kingspan GreenGuard Type VII XPS Insulation Board is made of synthetic materials that are generally recognized as not providing a food source for insects, fungus, mold, or mildew. It should always be properly installed and stored. Kingspan GreenGuard Type VII XPS Insulation Board is HCFC free.
Kingspan GreenGuard Drainage Channel Insulation Board comprises closed-cell extruded polystyrene (XPS) and is available with a minimum compressive strength of 40 psi. It has high water resistance and R-value of 5.0 per inch of thickness. Drainage channels are cut along all 4 sides of the board at .5 inches deep and .25 inches wide. When placed facing down in a protected membrane roof assembly (PMRA), channels permit drainage of water that seeps through to the roof membrane.
Kingspan GreenGuard XPS Insulation Board is made of synthetic materials that are generally recognized as not providing a food source for insects, fungus, mold, or mildew. It should always be properly installed and stored. Kingspan GreenGuard Type V XPS Insulation Board is HCFC free.
