StoColor Lotusan® Intelligent paints with Lotus-Effect® Technology
In addition to excellent physical properties, StoColor Lotusan® facade paints incorporate the unique and patented Lotus-Effect® Technology. It guarantees active, moisture-regulating weatherproofing of facades. The result: dirt runs off with the rain. The facade stays clean and pristine for longer. Algae and fungal attack are sustainably stemmed.
Delivery form
15 l pail
360 l pallet
Approx. consumption: 0.18 – 0.20 l/m² per paint coat
GRANITECH® Clean Air and Anti-Bacterial Ventilated Rainscreen Facade
ADVANTAGES OF USING GRANITECH® VENTILATED RAINSCREEN FAÇADE:
High Mechanical Strength
High Resistance To Thermal Shocks
Low Water Absorption
Non-flammability
Resistance Of Color Fading Due To U.V.
Resistance To Chemicals And Smog
Lightweight Slab
Low Maintenance Cost
Slabs Can Be Cut Directly On The Construction Site
FEATURES OF GRANITECH® VENTILATED RAINSCREEN FAÇADE :
Energy Saving And Elimination Of Heat Bridge
Protection Against Effects Of Atmospheric Agents
Elimination Of Surface Condensation
Elimination Of The Risk Of Cracked Covering
Lasting Efficiency Of The Insulating Material
Creation Of A Working Space For Pipe And Duct Housing
Dry On-site Installation Regardless Of Climatic Conditions
Possibility To Carry Out Maintenance On Individual Slabs
Mechanical Coupling Of The Slabs For Absolute Safety
Lightweight System Feasible For Heritage Renovation
GranitiFiandre® also specializes in supplying other anti-bacterial products to stations, airports, shopping centers, hospitality, banks, corporate headquarters and automotive industry worldwide.
Organic texturing finishing render for imitating stone and ceramic surfaces
Sto GraniTexTM is a Spray-Applied Acrylic-Based Interior and Exterior Wall Coating
Formulated for Durability and Low Maintenance in New Construction and Renovation Projects
Features of Sto GraniTexTM Wall Coating:
Ready to use and no additive is needed
Excellent adhesion and weatherability
UV resistant which allows colors remaining bright
Unlimited design capabilities, using EPS for EIFS System
Water-based which is safe, non-toxic and can be cleaned up with water
Variegated aggregate which permits cut stone and granite looks, but with less weight
VOC complaint meeting South Coast Air Quality Management District (SCAQMD) requirements
Vapor permeable which allows substrate to breathe naturally and resists blistering caused by trapped water vapor
Area of application:
Exterior and interior
Decorative top coat
Properties
Decorative: very good imitation of a real stone or ceramic appearance
Good weather-resistant, water-repellent, water vapour permeable
Resistant to acid rain, algae and fungi
Good adhesion, application properties, dirt-pickup and long-term colour stability
Massive, elastic surface, crack-bridging in case of small cracks, good mechanical resistance
Easy application with spray and/or trowel application
Appearance
With AM, AP, BIM, BIP, BM, BP, CM, CP series the product offers different surface pattern
Colour shade
Tintable in accordance with the Sto-GraniTex colour chart. When used on the facade the lightness value of the colour shade may generally not be less than 20%. Recommendations on the intermediate and base coat for the joints must be based on the StoColor System.
Please note that the some colour shade can appear differently due to different application methods.
RSIC-1 Resilient Sound Isolation Clips provide 2 unique approaches to sound privacy that will prevent sound from noisy neighbors transmitting through your walls or floor/ceiling assemblies.
Experience with the RSIC-1 resilient channel sound isolation clips has recorded remarkable improvements of up to an additional 20 STC points on walls.
The RSIC-1-R resilient channel sound isolation clip is designed to retrofit and improve existing walls and ceilings has shown to improve existing walls by as much as 8-10 dB by actual field tests.
Walls – One and Two layers of 5/8″ Gypsum Board
Resilient Sound Isolation Clip (RSIC-1) shall be 48 inches maximum on center (horizontal)
Fasten the Resilient Sound Isolation Clip (RSIC-1) to the substrate with a fastener approved for a minimum pull-out and sheer of 120 lbs
Ensure the ceiling sound isolation clip’s internal metal ferrell is tight to the substrate
Locate the first row of RSIC-1 resilient channel sound isolation clips within 3 inches from the floor and within 6 inches from the ceiling
Snap in the drywall furring channel (hat track) into the RSIC-1 resilient channel sound isolation clips (horizontal for walls)
Place 1/4″ (minimum) shim on floor to fully support the gypsum board
Install the gypsum board from the bottom up leaving a 1/4″ min. gap around perimeter.
ONLY remove the shims after ALL the gypsum board is completely screwed to ALL the drywall furring channels. Make sure every screw (floor to ceiling and wall to wall) is installed as required by the resilient channel clip’s design, in every layer of gypsum board before removing the shims at the floor. The shims are critical to ensure best results with sound isolation clips
Caulk around the entire perimeter of the gypsum board. Use fire and smoke rated acoustical sealant where required